omgpham…
28Dec/150

Start Up!

 

This was not a smooth start up.... Ran into a few issues earlier on, car would crank over and sometimes nearly run but never more than than a fraction of a second. Went through and checked through the wiring and grounds, everything was good there, a quick visual inspection of the cam gear and cam lobes to see if they were in the right positions. And a whole bunch of things....

The ECU logs showed consistent sync loss, error no. 31. Something was wrong with the cam/crank sensors. In my particular case it was caused by the crank trigger wheel being installed backwards :P. And I actually did check it earlier on, but checked it incorrectly!

20151226_174319

compositelog

Once I flipped that trigger wheel around, it started right away! Here's a quick video of it, more to come later!

Comments (0) Trackbacks (0)

Leave a comment

No trackbacks yet.